Bremerhaven Talk 🎤
On 4 November, we welcomed the Bremen Chamber of Commerce, the Chamber of Industry and Commerce for Bremen and Bremerhaven, and BIS Wirtschaftsförderung Bremerhaven as our guests.
Following a tour of our premises, the Bremerhaven Talk with Prof. Dr Stephanie Birkner focused on our history and the takeover. To round things off, there was soup, drinks and plenty of good conversation.
Thanks to everyone who took part! 💪
#BremerhavenTalk #Bremerhaven #EundA
These rotor bearings have had their day. What may just look like old scrap metal in the picture is, to us, a clear warning sign. If signs of wear like this are ignored, it is only a matter of time before the engine is a write-off.
Many operators have no idea what their machines actually look like on the inside. Operating electrical machinery without carrying out an analysis is like driving a car without a fuel gauge: you don’t know when you’re running out of fuel – and suddenly you come to a standstill in the middle of the road.
Here at EundA, we make sure it never gets to that stage in the first place:
Condition assessment: We detect bearing damage before it destroys the shaft or the windings. Vibration & analysis: Using state-of-the-art measurement technology, we listen deep into your machine. Cost-effectiveness: A planned bearing replacement costs a fraction of what a production downtime lasting several days due to motor failure would cost.
We ensure availability by taking action before a breakdown forces you to act. Whether in industry, at water utilities or on board a ship – we keep a close eye on the condition of your components.
When were your engines last thoroughly checked? Don’t take any risks.
👉 Book your appointment now for a professional analysis – link in the bio!
#E&A #Rotor bearings #Maintenance #Electrical engineering #Bremerhaven
Maintenance rather than downtime ⚙️
A 5-megawatt wind turbine is currently in our workshop for maintenance and repair. The customer had noticed some abnormalities with the ball bearings.
Here’s what’s happening here at the moment:
✅ Remove the ball bearings and inspect the raceways. The preliminary electronic analysis suggests a potential issue, whilst a visual inspection of the bearings reveals the actual damage to the machine.
✅ Wash the machine thoroughly.
✅ Check the windings using partial discharge measurement. This enables us to identify weak points in the insulation before they lead to a failure.
✅ Check the bearing seats.
✅ Check the slip rings and carbon brushes, including the spring tension. This is a major source of faults: if something is wrong, sparks may be generated.
Why this is important: If the bearings are not inspected in good time, they will fail and, in the worst-case scenario, may also damage the rotor and shaft. What starts as routine maintenance can then turn into a major case of consequential damage.
Our recommendation: Have generators of this size serviced and overhauled at regular intervals. An unplanned breakdown costs significantly more than a planned repair.
Are you planning your next maintenance visit? Please get in touch: vertrieb@eunda.de
We create availability.
#E&A #Wind energy #Generator #Maintenance #Bremerhaven
This is Torsten Campen, one of our managing directors at EundA.
For Torsten, electrical engineering is not just an industry, but a daily mission.
His aim is clear: to cement EundA’s position as the leading service partner you can rely on when it really matters.
What drives Torsten? The certainty that our work ensures the availability of your equipment. Whether it’s the main propulsion system of a giant ship or the emergency power supply for a hospital – we know that engines and generators are at the heart of your operations.
Under Torsten’s leadership, we at EundA combine traditional craftsmanship with state-of-the-art diagnostics. We look where others give up, and find solutions where others see only problems.
Would you like to find out more about how Torsten and the whole team can make your facilities fit for the future?
#EandA #Management #Bremerhaven #Electrical Engineering #Business Management #Service Partner #Availability #Shipping #Industry
Welcome to our training workshop 🔧
This is where our apprentices learn the basics before moving on to the large machines.
Building, measuring and testing circuits; troubleshooting faults. As part of your training as an electronics technician specialising in machinery and drive technology, you’ll also learn how to make motor windings yourself. Genuine specialist knowledge that hardly anyone has mastered these days 💪
We are offering apprenticeships starting on 1 August:
✅ Electronics Technician for Industrial Engineering (m/f/d)
✅ Electronics Technician specialising in Machinery and Drive Technology (m/f/d)
Still not sure? Then why not do an internship with us first and take your time to have a look around. School internships are available from Year 8 onwards.
Link to the application in the bio 👉
#EandA #Training #Bremerhaven #Electronics Technician #Skills
What looks like simple wires at first glance forms the basis for the performance of your electric machines. At EundA, we leave nothing to chance when it comes to winding coils.
Each wire is prepared with precision so that it fits perfectly into the groove later on. Why do we take such care? Because a motor winding is not an off-the-shelf product.
We see our work as a „bespoke suit“ for your machine:
- Bespoke manufacturing: We tailor the windings precisely to the specific requirements and operating conditions of your system.
- Top-quality materials: This is the only way we can guarantee a long service life and maximum efficiency.
- Avoiding vulnerabilities: Precision during preparation prevents short circuits in the windings and thus costly unplanned downtime.
Whether it’s for an underwater pump at a water treatment plant or a generator on a ship – we ensure that your machine’s internal components are up to standard. After all, only a perfect winding can guarantee the reliability you need for your operations.
Do you have any motors that need a complete overhaul or a new winding? We’ll get them back up and running.
👉 Get in touch with us directly or find out more about our services on our website!
#EandA #Electrical Engineering #Winding #Precision #Handicrafts #Bremerhaven #Electrical Engineering #Repair
The roof is on. ✅
A few months ago, we showed you the base plate.
Our new cold store is now up and running, and the first pallet spaces are already full.
Engines and spare parts that were previously taking up space in the workshop are now stored here. This gives our team more room to work indoors again.
Now we can carry on in Bremerhaven 🙌
#EandA #B site update #B Bremerhaven #E electrical engineering # growth
Our warehouse is no ordinary DIY store – it is a treasure trove of electrical engineering. Here you’ll find solutions for sectors that never sleep: shipping, offshore and heavy industry.
Whether it’s different wire gauges for bespoke rewinding or highly specialised ball bearings for generators – we stock everything your machine needs to enjoy a new lease of life.
Why is our stockholding to your advantage?
- Variety: We cover a wide range of manufacturers and sizes.
- Quality: Only certified components make it onto our shelves.
- Bespoke work: Thanks to our extensive stock, we can tailor repairs – just like a bespoke suit – precisely to your technical requirements.
At EundA, our warehouse is not just a storage facility, but the foundation of our craft. We have the capacity to provide the right solution straight away, even for complex systems.
What’s your machine missing? We’ve probably already got it to hand.
#EandA #Warehouse Logistics #Electrical Engineering #Bremerhaven #Spare Parts Service #Maintenance #Industry #Availability #Shipping
We have installed a system for variable speed control and propeller adjustment on the Dagmar. The aim: to improve energy efficiency whilst sailing at sea.
The technical challenge with variable speeds: exhaust gas temperatures rise rapidly into a critical range.
Anyone who does not have a precise understanding of the condition of their machinery here risks unnecessary wear and tear or, in the worst-case scenario, a breakdown on the high seas.
Our practical solution: We have incorporated a cylinder bypass control system that directs fresh air into the system and reliably lowers temperatures.
This ensures reliability and maximum availability – because the technology has to be up and running when it really matters.
Whether in shipping, industry or offshore: we ensure that your facilities operate cost-effectively and without disruption.
👉 Do you keep an eye on the condition of your systems? Get in touch with us directly for an analysis or have a look at our website!
#EandA # Marine Electrical Engineering # Electrical Machinery Engineering # Shipping # Bremerhaven # Service
When we talk about a comprehensive service, that’s exactly what we mean.
Here you can see how we give a junction box the right upgrade. Whether it’s new cable entries or bespoke modifications – at EundA, the solution isn’t just found on the circuit diagram, but also on the bench drill.
Why is that important to you?
- Everything under one roof: You don’t need to split your project up. We carry out the electrical repairs and the necessary mechanical modifications entirely in-house.
Speed: No unnecessary interfaces or waiting times caused by external
- Service provider. We drill, mill and fit parts so that your machine can be back up and running as quickly as possible.
- Precision: Even a terminal box must fit perfectly to ensure safety and a watertight seal (particularly in offshore or marine applications).
We are your specialist in electrical machinery – and that also means we get stuck in when it comes to the hardware involved. We ensure availability by keeping every detail under control.
Does your system require a bespoke solution that isn’t available from the catalogue? We’ll build it for you.
👉 You can find out more about our on-site service and our workshop services via the link in our bio!
#EandA #Electrical Engineering #Mechanics #Bremerhaven #WorkShop #Skills #Full Service #Solution-Oriented
This is what happens when maintenance isn’t carried out properly... ⚙️
The bearing on this generator has failed whilst in operation.
You can see the result in the video: a total economic write-off. It’s no longer worth repairing it.
The sad thing is: bearing damage rarely comes out of the blue. There are warning signs. Through rising temperatures, changes in running noise, and increased vibration. If you check these regularly and interpret the signs correctly, you can spot the damage at a stage when simply replacing the bearing is sufficient. That’s why maintenance involves more than just a quick re-greasing:
✅ Assess and document the condition of the stock
✅ Check the temperature profile, for example using a thermal imaging camera
✅ Take any unusual running noises seriously before the machine breaks down
We carry out diagnostics, maintenance and repairs on electric motors and generators. We are manufacturer-independent and have been based in Bremerhaven for over 100 years. We ensure operational availability.
Would you like to know what condition your machines are really in? Send us a message or an email at vertrieb@eunda.de 📩
#EandA #Maintenance #Mainttenance #Generator #Bearing failure #Electrical engineering #Bremerhaven #Availability
Have you always wanted to know what the job’s like before you apply? Then here’s your trailer 🎬
At E+A, we repair and maintain motors, generators and switchgear. We re-wind stators and carry out work in the workshop, on the test bench and directly at the customer’s premises. This work requires genuine craftsmanship, combined with a spirit of tinkering and curiosity.
Does that sound like you? Then come and join the team!
👉 All the information and vacancies on eunda.de
#EandA #Electrical Engineering #Electrical Machinery Engineering #Jobs #Bremerhaven #Careers #Skills #Training
Completely rewound. Entirely by hand. 🤲
In the photo, a colleague is working on rewinding a generator for a Norwegian customer.
What does that mean? The old winding is completely removed, and every single coil is remade from copper wire and fitted into the stator by hand. Turn by turn, with the utmost care and precision.
After all, it’s down to millimetres here that determine whether the insulation holds and the generator ultimately runs reliably. One wrong move and the whole circuit won’t fit anymore.
For us, this is part of our daily routine. For our customers, it’s the difference between waiting weeks for a new generator and having a machine that’s up and running again in no time.
Repair rather than replace. Manufacturer-independent and worldwide. 💪
#EandA #Electrical Engineering # Rewinding # Generator # Craftsmanship #Bremerhaven
If this engine stops, it’s all over. 🌊
We are currently carrying out a complete overhaul of this large motor at our workshop in Bremerhaven. It is the heart of a pumping station – and therefore vital for the region. Without these pumping stations, large parts of the surrounding area would literally be flooded.
Whether in water management, industry or shipping: large electrical machines are at the heart of every plant. Many operators assume that everything is fine as long as the machine is running. However, anyone who is unaware of the actual condition of their units is taking a significant risk. A sudden breakdown leads to unplanned downtime, costly emergency call-outs and financial losses.
Our motto is clear: preventing downtime is always cheaper than dealing with it.
Using precise diagnostic technology and drawing on decades of experience in electrical engineering, we analyse the condition of your machinery, overhaul it professionally in our workshops and take action before it is too late. We provide a comprehensive service, from the initial analysis right through to commissioning.
👉 Do you know exactly how healthy your motors are at the moment? Don’t leave the operational readiness of your systems to chance. Simply send us a message directly for a thorough condition assessment!
# Electrical Engineering # Maintenance # Water Management
We’re looking for new team members 🛠️
At EundA, you’ll be repairing electric motors and generators that really matter. Sometimes in the workshop in Bremerhaven, sometimes out on site, and sometimes in a ship’s engine room.
No two days are the same. That is precisely why we are looking for people who think for themselves and know their trade.
Currently open:
👉 Electrician / Electronics Technician for Industrial Engineering (m/f/d)
👉 Electrical machinery engineers (m/f/d)
👉 Electronics technicians specialising in machinery and drive technology (m/f/d)
👉 Machine fitter (m/f/d)
👉 Mechatronics Engineer in Mechanical and Plant Engineering (m/f/d)
All full-time positions, based in Bremerhaven, to start as soon as possible.
Here’s what you’ll get in return:
✅ A permanent position and a collective agreement with IG Metall
✅ 37-hour working week
✅ Supplementary health insurance and bike leasing
✅ State-of-the-art workshops, test benches and training
✅ A team that sticks together 💙
It only takes a minute to apply. You can use the online form or simply apply via WhatsApp. You can submit your CV and references later.
Link in the bio 🔗
Swipe through all the info 👉
#EandA #Bremerhaven #Jobs #Electrical Engineering #Skills #Electrotechnology
A look inside our training workshop 👀
We’re currently working on the basics here. Before our trainees are allowed to work on the large machines, they need to understand, on a small scale, how a control system works.
In the picture, two of them are practising on the mounting plates. Switches, terminal blocks, fuses – all in miniature form. Each wire must be connected to the correct terminal, and every connection must be secure. If there’s a mistake, nothing will work in the end.
At EundA, we offer training in two specialisms: electronics technicians for machinery and drive technology, and for industrial engineering. Whilst these may sound similar at first, they cover everything from precision electronics to heavy-duty mechanics.
Exactly what counts later on, whether on a ship or at an industrial plant, when a fault needs to be found 💪
Those who learn here become all-rounders.
#EandA #training #Bremerhaven #Eelectrical engineering #trade
No master has ever fallen from the sky… But we have.
It’s BIM this week and we’ll be there both days. Friday and Saturday at the Stadthalle in Bremerhaven, with our own stand and colleagues who can tell you what the job is really like.
You can ask us anything: how an apprenticeship at E+A works; what you do on a typical day; or whether electrical engineering is the right choice for you at all.
Friday 8 am to 2 pm, Saturday 10 am to 2 pm.
Admission is free; you don’t need to book in advance.
Do pop round. We look forward to seeing you.
#BIM2026 #Bremerhaven #Vocational Training #Electrical Engineering #Vocational Guidance
Auxiliary generators are at the heart of every ship, whether it is in port or at anchor.
They ensure basic services on board. The problem? Older ships often have generators fitted whose manufacturers have long since gone out of business. Just ordering a new spare part? Impossible.
Anyone who takes the risk of exceeding the maintenance intervals is playing with fire. If the generator fails on the open sea, the following risks arise:
High follow-up costs for emergency operations at sea.
The shipping company is suffering massive losses because it is unable to fulfil its charter contracts.
Long periods of downtime that cost money.
This is exactly where we come in. Without a thorough analysis and regular servicing, you’re driving a car without a fuel gauge:
You never know when your machinery might break down. Here at EundA, we make sure your electrical machinery keeps running – from the initial diagnosis through to overhaul and commissioning. We ensure uptime so that your fleet stays on the move.
When were the generators on your ships last thoroughly checked? Let us know in the comments or get in touch directly to book a check-up! 👇
# Electrical Engineering # Shipping # Shipping Companies # Ship Services # Generators # Maintenance # Reliability # Electrical Engineering # R&D # Maritime Economy
For us, a good repair or maintenance job begins long before we even pick up a spanner.
Whether it’s a complex offshore operation, an overhaul at an industrial plant or maintenance work on a container ship – nothing works without precise project planning.
We’ll keep track of everything for you:
- Analysis & Assessment: We clarify exactly what your machine needs in advance.
- Resource management: We plan our workforce and specialist tools in such a way as to keep downtime to a minimum.
- Adherence to deadlines: We know that every hour without a drive unit costs money. That’s why our planning acts as your safety net.
We don’t just take a quick look at the engine. We plan the entire process, from the initial diagnosis right through to successful commissioning. That’s how we ensure the uptime that makes your business profitable.
Do you have a technical challenge that requires careful planning? We’ll listen, understand your needs and find the right solution.
👉 Send us a message or use the link in our bio to get in touch!
#EandA #Project Planning #Electrical Engineering #Bremerhaven #Industrial Services #Availability #Skilled Trades
The third day of the SMM trade fair in Hamburg. Here are a few snaps from our stand.
📍 You’ll find us at the @bis_bremerhaven joint stand in Hall B7, Stand 130. Do pop by if you’d like to discuss repairs, condition analysis or spare parts for your electric motors and generators.
We bring to the table what we do best: over 100 years’ experience in electrical engineering and an honest assessment of what can and cannot be repaired.
Who else here is still at the SMM? Let us know in the comments – we’re looking forward to chatting 🙌
#EandA #SMM2026 #E Electrical Engineering # Bremerhaven
EundA was honoured with the Business Award Germany for its many years of successful collaboration.
...
The Fischtown Pinguins have once again played an outstanding season. Third place in the main round is the second-best result in the club's history. Congratulations from the entire...
EundA wishes all customers, suppliers and friends a Merry Christmas. Stay healthy and have a good start to the new year!
...
We will continue to support the Fischtown Penguins in the 2024/25 season!
...
Copyright by EundA & 21HAVN
